Language Selector

Wiki

FrontPage

13485073 Views
Average (27 Votes)

Message Boards

Canon S530D Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon S530D Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon S530D Driver, Firmware and Manuals for Windows and MacOS

There are many drivers, software and settings to choose from on the https://dnasofts.com/ website for your Canon product that will work with each operating system or without driver software! Click below to learn more about compatibility details of products in detail.
S530D is a printer that has all the essential features you need to get your work done. It can produce print quality up until 4800 x 1200 dpi, with two FINE (fill-in only) cartridges for black and color printing respectively which are both refillable when they run out! The machine also provides fast speeds in several areas including 8.8ipm at its highest possible resolution on B&WC; 5imp/minityp however this may not be enough if high amounts of graphics or photos must appear throughout an document due largely thanks again too reduced ink yield capacity seen earlier mentioned).

Canon S530D Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon S530D Driver

- Canon S530D printer driver is a great way to stay up-to date with your office's printing devices! You can monitor the warning signs that an ink cartridge needs changing, check out any errors during scanning photos from one side onto paper produced by another (blurred), and more.
- We all have those days where we just can't get our printer working, and it seems like there is an endless list of error code that the darn thing will give us when everything finally does work. This driver helps with these issues of Canon S530D by fixing 'paper jam' or other problems related to your document feeder being full (which happens more often than you think!). But don't worry; these Canon S530D drivers won't let hackers into WIC utilities tool reset chip either!

Download Canon S530D Driver for Windows:

- Download Canon S530D Driver for Windows 11: DOWNLOAD LINK

- Download Canon S530D Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon S530D Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon S530D Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon S530D Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon S530D Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon S530D Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon S530D printer Driver for Mac OS:

- Download Canon S530D Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon S530D Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon S530D

STEP 1: Go to our website and search for "Canon S530D driver, firmware, manual"

STEP 2: Choose your specific Canon S530D driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon S530D driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon S530D driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon S530D Firmware

- The Canon S530D printer Firmware is an intermediary software developed by Canon company, which helps to interact between the hardware of a printer with each other. It can be used when printing from your computer or sending jobs over Wi-Fi Direct/Ethernet direct connection and it will ensure that everything goes smoothly without any errors occurring during transfer because this process relies on compatibility built into its own code rather than using external programs such as those found bundled onto Microsoft Office suites like Word & Excel etc..
- In order for refilling ink levels in these situations where there may have been some error caused either internally (due typically at least partially) due problems related incorrectly installed components), they're usually best left handled by technicians who know what they are doing.
- The printer errors can make you feel frustrated when you don't know what caused your problem. Original Firmware, or in layman's terms "printer firmware" is developed by Epson company which helps interact between themselves and their hardware during printing either from computer-based operations or Wi-Fi Direct connections over Ethernet cables direct connection via WIMAX networks

Download Original Canon S530D Firmware for Windows:

- Original Canon S530D Firmware for Windows: DOWNLOAD LINK

Download Canon S530D Firmware for Mac OS:

- Original Canon S530D Firmware for Mac OS: DOWNLOAD LINK

Canon S530D User Manual

- The Canon S530D Manual for your Canon S530D printer includes instructions to fix common problems and issues. It covers basic disassembly, as well as the steps needed when choosing between different ink types or if there's a clogged printhead that needs clearing out with no clear answer on what will work best in these circumstances?
- Canon S530DUser Guides provide troubleshooting tips such an easy way of getting around features found within any given model; however some may only include limited information compared those containing more detailed explanations - this could be due partially because they're designed specifically towards beginners who might not yet know everything about using certain items
- With the Canon S530D Manual, you can fix errors code or common problem like "printer is unresponsive" or "bad quality prints and slow scanning". You may also use this guide for following instructions on how to disassemble your Canon S530D printer so that maintenance work becomes easy!

- Canon S530D User Manuals for Windows: DOWNLOAD LINK

- Canon S530D User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon S530D error code list

- Code: E000-0001
- Description: Fixing belt temperature rise is insufficient at power ON. Fixing main thermistor (THM1-1) temperature does not reach 50 degrees Celsius within 120 seconds after startup of fixing belt temperature control.
- Solutions: 1. Check if the detection temperature of the thermistor is risen in service mode. A. In case that either one of the thermistor detection temperature is risen A-1. Replace the fixing belt unit A-2. Faulty drawer connector -> Clean the drawer connector or replace the fixing assembly B. In case that neither of them are not risen B-1. Check the connection of the fixing thermistor (to see if the connection of the drawer is faulty, the connector is physically removed or disconnected) -> replace the fixing belt unit B-2. Check the connection of the IH power connector (to see if the connector is physically removed or disconnected, or the cable is caught) B-3. Replace the IH power unit B-4. Replace the DC controller PCB


- Code: E000-0101
- Description: Pressure belt temperature rise is insufficient at power ON. Pressure main thermistor (THM2) temperature does not reach 50 degrees Celsius within 250 seconds after startup of pressure belt temperature control.
- Solutions: 1. Check if the detection temperature of the thermistor is risen in service mode. A. In case that either one of the thermistor detection temperature is risen A-1. Check the pressure belt main thermistor (to see if the thermistor is disconnected, the harness of the thermistor is disconnected, foreign substance is in the thermistor, failure of the thermistor) -> replace the main thermistor or the pressure stay A-2. Faulty drawer connector is a possible cause -> clean the drawer connector or replace the fixing assembly B. In case that neither of them are not risen B-1. Check the connection of the AC driver connector (to see if the connector is physically removed or disconnected, or the cable is caught) B-2. Replace the AC driver unit B-3. Replace the DC controller PCB B-4. Replace the fixing unit


- Code: E001-0001
- Description: Abnormal temperature rise of fixing main thermistor (circuit failure). Fixing main thermistor (THM1-1) sensed an abnormal high temperature. (ASIC detection)
- Solutions: 1. Check the detection temperature of the fixing main thermistor in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the fixing main thermistor (THM-1) is caught -> replace the fixing belt unit B. In case that the detection temperature is other than 250 degC B-1. Replace the DC controller PCB


- Code: E001-0002
- Description: Abnormal temperature rise of fixing subthermistor 1 (THM1-2) (circuit failure). Fixing subthermistor 1 (THM1-2) sensed an abnormal high temperature. (ASIC detection)
- Solutions: 1. Check the detection temperature of the fixing sub thermistor 1 in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the fixing sub thermistor 1 (THM-2) is caught -> replace the fixing belt unit B. In case that the detection temperature is other than 250 degC B-1. Location of the fixing main thermistor is inappropriate -> replace the fixing belt unit B-2. Replace the DC controller PCB


- Code: E001-0003
- Description: Abnormal temperature rise of fixing subthermistor 2 (THM1-3) (circuit failure). Fixing subthermistor 2 (THM1-3) sensed an abnormal high temperature. (ASIC detection)
- Solutions: 1. Check the detection temperature of the fixing sub thermistor 2 in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the fixing sub thermistor 2 (THM-3) is caught -> replace the fixing belt unit B. In case that the detection temperature is other than 250 degC B-1. Location of the fixing main thermistor is inappropriate -> replace the fixing belt unit B-2. Replace the DC controller PCB


- Code: E001-0011
- Description: Fixing main thermistor abnormal temperature rise (circuit abnormality). Fixing main thermistor (THM1-1) detected abnormal high temperature. (software detection)
- Solutions: 1. Check the detection temperature of the fixing main thermistor in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the fixing main thermistor (THM-1) is caught -> replace the fixing belt unit B. In case that the detection temperature is other than 250 degC B-1. Replace the DC controller PCB

- Code: E001-0012
- Description: Fixing sub thermistor 1(THM1-2)abnormal temperature rise (circuit abnormality). Fixing sub thermistor 1(THM1-2) detected abnormal high temperature. (software detection)
- Solutions: 1. Check the detection temperature of the fixing sub thermistor 1 in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the fixing sub thermistor 1 (THM-2) is caught -> replace the fixing belt unit B. In case that the detection temperature is other than 250 degC B-1. Location of the fixing main thermistor is inappropriate -> replace the fixing belt unit B-2. Replace the DC controller PCB


- Code: E001-0013
- Description: Fixing sub thermistor 2(THM1-3)abnormal temperature rise (circuit abnormality). Fixing sub thermistor 2(THM1-3) detected abnormal high temperature. (software detection)
- Solutions: 1. Check the detection temperature of the fixing sub thermistor 2 in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the fixing sub thermistor 2 (THM-3) is caught -> replace the fixing belt unit B. In case that the detection temperature is other than 250 degC B-1. Location of the fixing main thermistor is inappropriate -> replace the fixing belt unit B-2. Replace the DC controller PCB


- Code: E001-0102
- Description: Abnormal temperature rise of pressure subthermistor 1 (THM3) (circuit failure). Pressure subthermistor 1 (THM3) sensed an abnormal high temperature. (ASIC detection)
- Solutions: 1. Check the detection temperature of the pressure sub thermistor 1 in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the pressure sub thermistor 1 (THM-3) is caught -> replace the pressure stay B. In case that the detection temperature is other than 250 degC B-1. The pressure main thermistor is disconnected, the harness is disconnected, foreign substance is gotten in, or failure -> replace the main thermistor or pressure stay B-2. Replace the DC controller PCB


- Code: E001-0103
- Description: Abnormal temperature rise of pressure subthermistor 2 (THM4) (circuit failure). Pressure subthermistor 2 (THM4) sensed an abnormal high temperature. (ASIC detection)
- Solutions: 1. Check the detection temperature of the pressure sub thermistor 2 in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the pressure sub thermistor 2 (THM-4) is caught -> replace the pressure stay B. In case that the detection temperature is other than 250 degC B-1. The pressure main thermistor is disconnected, the harness is disconnected, foreign substance is gotten in, or failure -> replace the main thermistor or pressure stay B-2. Replace the DC controller PCB


- Code: E001-0111
- Description: Pressure main thermistor abnormal temperature rise (circuit abnormality). Pressure main thermistor (THM2) detected abnormal high temperature. (software detection)
- Solutions: 1. Check the detection temperature of the pressure main thermistor in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the pressure main thermistor (THM-2) is caught -> replace the thermistor or the pressure stay B. In case that the detection temperature is other than 250 degC B-1. Replace the DC controller PCB


- Code: E001-0112
- Description: Pressure sub thermistor 1(THM3)abnormal temperature rise (circuit abnormality). Pressure sub thermistor 1(THM3) detected abnormal high temperature. (software detection)
- Solutions: 1. Check the detection temperature of the pressure sub thermistor 1 in service mode. A. In case that the detection temperature is 250 degC A-1. The cable of the pressure sub thermistor 1 (THM-3) is caught -> replace the pressure stay B. In case that the detection temperature is other than 250 degC B-1. The pressure main thermistor is disconnected, the harness is disconnected, foreign substance is gotten in, or failure -> replace the main thermistor or pressure stay B-2. Replace the DC controller PCB

Support fix printer solution and reset Canon S530D:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars