Language Selector

Wiki

FrontPage

13483258 Views
Average (27 Votes)

Message Boards

Canon S500 Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon S500 Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon S500 Driver, Firmware and Manuals for Windows and MacOS

https://dnasofts.com/ is your one-stop shop to find drivers for Canon S500 printer softwares and utilities, or if you need information on the compatibility of Canon products with OS like Windows 7, Windows 8, Windows 10, Windows 11 or Linux, MacOS, ... We have found that our site has everything in this area that you might be looking for!
S500 is a sleek and stylish printer that has essential functions such as Wi-Fi, printing from anywhere with an internet connection or NFC tag on your phone (no more cables!), scanning documents to email them digitally right away - all without having to plug anything in! In addition it can produce up 4800 x 1200 dpi output quality making photos look crisp at any size. Two FINE cartridges are included: one black & white which produces 8 images per minute under ideal conditions; but only 5 for color prints every second when working quickly due their lower number of pixels per inch count vs other competitors.

Canon S500 Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon S500 Driver

- Canon S500 printer driver is a great way to stay up-to date with your office's printing devices! You can monitor the warning signs that an ink cartridge needs changing, check out any errors during scanning photos from one side onto paper produced by another (blurred), and more.
- We all have those days where we just can't get our printer working, and it seems like there is an endless list of error code that the darn thing will give us when everything finally does work. This driver helps with these issues of Canon S500 by fixing 'paper jam' or other problems related to your document feeder being full (which happens more often than you think!). But don't worry; these Canon S500 drivers won't let hackers into WIC utilities tool reset chip either!

Download Canon S500 Driver for Windows:

- Download Canon S500 Driver for Windows 11: DOWNLOAD LINK

- Download Canon S500 Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon S500 Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon S500 Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon S500 Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon S500 Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon S500 Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon S500 printer Driver for Mac OS:

- Download Canon S500 Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon S500 Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon S500

STEP 1: Go to our website and search for "Canon S500 driver, firmware, manual"

STEP 2: Choose your specific Canon S500 driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon S500 driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon S500 driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon S500 Firmware

- The Canon S500 Firmware is an intermediary software developed by Canon company, which helps to interact between the device's hardware and its operating system with each other. It can be used when printing from a computer or sending jobs over WiFi Direct/Ethernet direct connection; however these functions won't work without refilling them first since they need original fimrshed firmwares in order for certain things like troubleshooting technical errors occur properly.
- If there are any issues during use such as unstable components due to poor quality parts being used on the machine itself (or) if you receive error code EF1 or U0A5 then it might require assistance form someone who specializes in fixing up gadgets
- Canon S500 original Firmware, also known simply by laymen’s terms “printer firmware." This intermediary software was developed by Epson company which helps interact between themselves an<br>

Download Original Canon S500 Firmware for Windows:

- Original Canon S500 Firmware for Windows: DOWNLOAD LINK

Download Canon S500 Firmware for Mac OS:

- Original Canon S500 Firmware for Mac OS: DOWNLOAD LINK

Canon S500 User Manual

- Canon S500 User Manual also called S500 User's Guide, which is provided by Epson company after you had purchasing a product.
The Canon S500 user manual is a great resource for any person that owns or plans on owning one. The included instructions include basic disassembly of the machine, as well as individual parts like ink tanks and ink pumps-allowing you to change them out yourself if needed! There are also troubleshooting tips with solutions about what might be wrong before reaching out customer service so problems don't get more complicated than they need too!
- With the Canon S500 Manual, you can fix errors code or common problem like "printer is unresponsive" or "bad quality prints and slow scanning". You may also use this guide for following instructions on how to disassemble your Canon S500 printer so that maintenance work becomes easy!

- Canon S500 User Manuals for Windows: DOWNLOAD LINK

- Canon S500 User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon S500 error code list

- Code: 001-0001-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Unit Main Thermistor detected an abnormally high temperature.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1 (THM11/J7404) - Fixing Film Unit - Pickup Driver PCB (UN4) [Solutions] Perform the following in the order while checking whether the error is cleared. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. 1. Check the harness between the Pickup Driver PCB and the Fixing Film Unit Main Thermistor. 2. Pull out the Fixing Feed Unit and check 'FIX-UC'. a. In the case of below 240 deg C, replace the Fixing Film Unit. b. In the case of 240 deg C or higher, disconnect the connector of the Pickup Driver PCB and then check 'FIX-UC' again. b-a. In the case of below 240 deg C, replace the harness between the Pickup Driver PCB and the Drawer Unit. b-b. In the case of 240 deg C or higher, replace the Pickup Driver PCB.


- Code: 001-0002-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Unit Sub Thermistor 1 detected an abnormally high temperature.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 2 (THM13/J8003) - Fixing Film Unit - Pickup Driver PCB (UN4) [Solutions] Perform the following in the order while checking whether the error is cleared. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. 1. Check the harness between the Pickup Driver PCB and the Fixing Film Unit Sub Thermistor 1. 2. Pull out the Fixing Feed Unit and check 'FIX-UC'. a. In the case of below 240 deg C, replace the Fixing Film Unit. b. In the case of 240 deg C or higher, disconnect the connector of the Pickup Driver PCB and then check 'FIX-UC' again. b-a. In the case of below 240 deg C, replace the harness between the Pickup Driver PCB and the Drawer Unit. b-b. In the case of 240 deg C or higher, replace the Pickup Driver PCB.


- Code: 001-0003-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Unit Sub Thermistor 2 detected an abnormally high temperature.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 2 (THM13/J8003) - Fixing Film Unit - Pickup Driver PCB (UN4) [Solutions] Perform the following in the order while checking whether the error is cleared. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. 1. Check the harness between the Pickup Driver PCB and the Fixing Film Unit Sub Thermistor 2. 2. Pull out the Fixing Feed Unit and check 'FIX-UC'. a. In the case of below 240 deg C, replace the Fixing Film Unit. b. In the case of 240 deg C or higher, disconnect the connector of the Pickup Driver PCB and then check 'FIX-UC' again. b-a. In the case of below 240 deg C, replace the harness between the Pickup Driver PCB and the Drawer Unit. b-b. In the case of 240 deg C or higher, replace the Pickup Driver PCB.


- Code: 001-0011-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Unit Main Thermistor detected an abnormally high temperature.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1 (THM11/J7404) - Fixing Film Unit - Pickup Driver PCB (UN4) [Solutions] Perform the following in the order while checking whether the error is cleared. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. 1. Check the harness between the Pickup Driver PCB and the Fixing Film Unit Main Thermistor. 2. Pull out the Fixing Feed Unit and check 'FIX-UC'. a. In the case of below 240 deg C, replace the Fixing Film Unit. b. In the case of 240 deg C or higher, disconnect the connector of the Pickup Driver PCB and then check 'FIX-UC' again. b-a. In the case of below 240 deg C, replace the harness between the Pickup Driver PCB and the Drawer Unit. b-b. In the case of 240 deg C or higher, replace the Pickup Driver PCB.


- Code: 001-0012-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Unit Sub Thermistor 1 detected an abnormally high temperature.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 2 (THM13/J8003) - Fixing Film Unit - Pickup Driver PCB (UN4) [Solutions] Perform the following in the order while checking whether the error is cleared. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. 1. Check the harness between the Pickup Driver PCB and the Fixing Film Unit Sub Thermistor 1. 2. Pull out the Fixing Feed Unit and check 'FIX-UC'. a. In the case of below 240 deg C, replace the Fixing Film Unit. b. In the case of 240 deg C or higher, disconnect the connector of the Pickup Driver PCB and then check 'FIX-UC' again. b-a. In the case of below 240 deg C, replace the harness between the Pickup Driver PCB and the Drawer Unit. b-b. In the case of 240 deg C or higher, replace the Pickup Driver PCB.


- Code: 001-0013-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Unit Sub Thermistor 2 detected an abnormally high temperature.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 2 (THM13/J8003) - Fixing Film Unit - Pickup Driver PCB (UN4) [Solutions] Perform the following in the order while checking whether the error is cleared. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. 1. Check the harness between the Pickup Driver PCB and the Fixing Film Unit Sub Thermistor 2. 2. Pull out the Fixing Feed Unit and check 'FIX-UC'. a. In the case of below 240 deg C, replace the Fixing Film Unit. b. In the case of 240 deg C or higher, disconnect the connector of the Pickup Driver PCB and then check 'FIX-UC' again. b-a. In the case of below 240 deg C, replace the harness between the Pickup Driver PCB and the Drawer Unit. b-b. In the case of 240 deg C or higher, replace the Pickup Driver PCB.

- Code: 001-0014-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Unit Thermistor (Rear) detected an abnormally high temperature.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 2 (THM13/J8003) - Fixing Film Unit - Pickup Driver PCB (UN4) [Solutions] Perform the following in the order while checking whether the error is cleared. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. 1. Check the harness between the Pickup Driver PCB and the Fixing Film Unit Thermistor (Rear). 2. Pull out the Fixing Feed Unit and check 'FIX-UC'. a. In the case of below 240 deg C, replace the Fixing Film Unit. b. In the case of 240 deg C or higher, disconnect the connector of the Pickup Driver PCB and then check 'FIX-UC' again. b-a. In the case of below 240 deg C, replace the harness between the Pickup Driver PCB and the Drawer Unit. b-b. In the case of 240 deg C or higher, replace the Pickup Driver PCB.


- Code: 001-0015-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Unit Thermistor (Front) detected an abnormally high temperature.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1 (THM11/J7404) - Fixing Film Unit - Pickup Driver PCB (UN4) [Solutions] Perform the following in the order while checking whether the error is cleared. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. 1. Check the harness between the Pickup Driver PCB and the Fixing Film Unit Thermistor (Front). 2. Pull out the Fixing Feed Unit and check 'FIX-UC'. a. In the case of below 240 deg C, replace the Fixing Film Unit. b. In the case of 240 deg C or higher, disconnect the connector of the Pickup Driver PCB and then check 'FIX-UC' again. b-a. In the case of below 240 deg C, replace the harness between the Pickup Driver PCB and the Drawer Unit. b-b. In the case of 240 deg C or higher, replace the Pickup Driver PCB.


- Code: 002-0001-05
- Description: Fixing Thermistor low temperature detection error
- Causes: After the Fixing Heater was turned ON, the Fixing Film Unit Main Thermistor detected no temperature increase.
- Solutions: [Related parts] R1.00 - Harness between the Pickup Driver PCB (UN4/J1489) and the IH Power Supply PCB (UN30/ J501) - Harnesses connecting the IH Power Supply PCB (UN30/J510), the Drawer Unit (J8027) and the Main Heater (H4) - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1 (THM11/J7404) - Main Heater (H4) - Fixing Film Unit - IH Power Supply PCB (UN30) - Pickup Driver PCB (UN4) [Solutions] Check/replace the related harness/cable, connector and parts. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR.


- Code: 003-0001-05
- Description: Fixing Thermistor low temperature detection error
- Causes: The Fixing Film Unit Main Thermistor detected an abnormally low temperature during print control.
- Solutions: [Related parts] R1.00 - Harness between the Pickup Driver PCB (UN4/J1489) and the IH Power Supply PCB (UN30/ J501) - Harnesses connecting the IH Power Supply PCB (UN30/J510), the Drawer Unit (J8027) and the Main Heater (H4) - Harnesses connecting the Pickup Driver PCB (UN4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 1 (THM11/J7404) - Main Heater (H4) - Fixing Film Unit - IH Power Supply PCB (UN30) - Pickup Driver PCB (UN4) [Solutions] Check/replace the related harness/cable, connector and parts. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR.


- Code: 004-0001-05
- Description: Protection circuit error
- Causes: Voltage error was detected while the IH Power Supply Relay was turned OFF.
- Solutions: Replace the IH Power Supply PCB (UN30).


- Code: 004-0201-05
- Description: Protection circuit error
- Causes: An error in temperature difference between the Fixing Film Unit Sub Thermistor 1 and 2 was detected.
- Solutions: [Related parts] R1.00 - Harnesses connecting the Pickup Driver PCB (N4/J1491), the Drawer Unit (J8001) and the Fixing Thermistor Unit 2 (J8003) - Harness between the Relay PCB (UN7/J1816) and the Fixing Motor (M48/J7612) - Fixing Film Unit - Fixing Motor (M48) - Pickup Driver PCB (UN4) - Relay PCB (UN7) [Solutions] Check/replace the related harness/cable, connector and parts.

Support fix printer solution and reset Canon S500:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars