Language Selector

Wiki

FrontPage

13627381 Views
Average (27 Votes)

Message Boards

Canon i860 Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon i860 Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon i860 Driver, Firmware and Manuals for Windows and MacOS

Check our comprehensive list of drivers, software, manuals and wireless settings that are suitable for Canon i860 printer or other Canon i860 software. And always stay up to date on the latest site updates by checking out our blog.
i860 Series is a printer that can provide decent quality color images and text documents. The 2 cartridge printing system provides the best performance for its size, which makes it perfect for home use as well! You will need to install genuine Canon drivers in order get full benefits from this device though- but don't worry because they are easy downloading online or by contacting customer support if you have any questions about installing them on your computer.
Lately there has been an increase of low cost inkjet printers hitting retail stores such as Walmart & Target. However these cheaper products often lack certain features like high resolution Monochrome (Black & White) graphics setup options among other things

Canon i860 Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon i860 Driver

- Canon i860 Drivers is an intermediate software that helps the transmission of data between computers and printers through USB connections, ports or Wi-Fi. This can be done in order to make printing easier on both sides; it also supports installation/repairing printer devices like monitoring warning parts are not working properly when they need repair or replacement (just like ink). The progress will show up as well as errors such blurred photo prints due do low resolution setting being enabled while scanning - but there'ss no reason you should have this problem if your settings matched what was suggested earlier!
- At first glance, it is difficult to understand why anyone would need a driver that fixes Canon i860 printer errors and issues. However there are many reasons someone might have this installed on their computer--maybe they got one piece of paper stuck in the machine causing an 'Paper Jam' error code while trying other things with Photoshop or Microsoft Office? Or maybe you were running low on ink so wanted try cleaning out some dirt inside before calling for help; either way if any type of problem arises users should know exactly where too find WIC utility reset chip (or hack adjustment programs) because finding them elsewhere will only lead more trouble later down road

Download Canon i860 Driver for Windows:

- Download Canon i860 Driver for Windows 11: DOWNLOAD LINK

- Download Canon i860 Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon i860 Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon i860 Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon i860 Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon i860 Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon i860 Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon i860 printer Driver for Mac OS:

- Download Canon i860 Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon i860 Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon i860

STEP 1: Go to our website and search for "Canon i860 driver, firmware, manual"

STEP 2: Choose your specific Canon i860 driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon i860 driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon i860 driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon i860 Firmware

- The Canon i860 printer Firmware is an intermediary software developed by Canon company, which helps to interact between the hardware of a printer with each other. It can be used when printing from your computer or sending jobs over Wi-Fi Direct/Ethernet direct connection and it will ensure that everything goes smoothly without any errors occurring during transfer because this process relies on compatibility built into its own code rather than using external programs such as those found bundled onto Microsoft Office suites like Word & Excel etc..
- In order for refilling ink levels in these situations where there may have been some error caused either internally (due typically at least partially) due problems related incorrectly installed components), they're usually best left handled by technicians who know what they are doing.
- The Canon i860 printer is more than just a means of reproduction, it has evolved into an essential tool for home and office use. When you need to troubleshoot or service your device call the pros at https://dnasofts.com/!
The Canon i860 original firmware can fix some errors related with hardware like sensors failure--restarting them in time so they don't fail repeatedly; circuit problems preventing electricity from flowing properly through components on print heads etc...
The Canon i860 original firmware in your printer is the software that allows it to function. With firmware, Canon i860 printer can be updated remotely via updates sent by manufacturers, which affect how you use and accomplish tasks with your Canon i860 printer - for example speeding up printing time!
Canon i860 Original Firmware is the software that controls your printer. It allows it to communicate with a computer and do what you want, like printing or copying things! The chip inside this device can be updated remotely so if there are any problems fixed in an update then they will fix them because of how close these two work together.

Download Original Canon i860 Firmware for Windows:

- Original Canon i860 Firmware for Windows: DOWNLOAD LINK

Download Canon i860 Firmware for Mac OS:

- Original Canon i860 Firmware for Mac OS: DOWNLOAD LINK

Canon i860 User Manual

- Canon i860 User Manual also called i860 Series User's Guide, which is provided by Epson company after you had purchasing a product.
The Canon i860 user manual is a great resource for any person that owns or plans on owning one. The included instructions include basic disassembly of the machine, as well as individual parts like ink tanks and ink pumps-allowing you to change them out yourself if needed! There are also troubleshooting tips with solutions about what might be wrong before reaching out customer service so problems don't get more complicated than they need too!
- The Canon i860 Manual is a great way to troubleshoot any problem with your printer. You can use the instructions from one of these books, follow them carefully and fix errors code or common issues like: Canon i860 printer is unresponsive; bad print quality (color mixing/resolution); Canon i860 won't scan because there are too many paper jams in it - this will cause slow printing times (or even non-existent) plus you might get an error message when trying to start up cleanups mode etc.; if it was Wi-Fi enabled then make sure that both connections work by scanning again until everything shows “Online successfully connected". After making certain all cables inside product connection settings match what they should do.

- Canon i860 User Manuals for Windows: DOWNLOAD LINK

- Canon i860 User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon i860 error code list

- Code: 001-0001-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Main Thermistor detected a high temperature error.
- Solutions: [Related parts] R1.00 - Harness connecting from the Feed/Drum Driver PCB (UN2/J213) to the Fixing Cooling Fan (Front) and (Rear) (FM5/J6068 and FM6/J6069) - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Fixing Cooling Fan (Front) (FM5) - Fixing Cooling Fan (Rear) (FM6) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - Feed/Drum Driver PCB (UN2) - DC Controller PCB (UN1) [Solutions] - Check COPIER> DISPLAY> ANALOG> FIX-E. a. In the case of below 283 deg C, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. b. In the case of 283 deg C or higher, check/replace the related harness/cable, connector and parts. [CAUTION] Do not turn ON the power before replacing the Fixing Film Unit. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 001-0002-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Thermistor (Front) detected a high temperature error.
- Solutions: [Related parts] R1.00 - Harness connecting from the Feed/Drum Driver PCB (UN2/J213) to the Fixing Cooling Fan (Front) and (Rear) (FM5/J6068 and FM6/J6069) - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Fixing Cooling Fan (Front) (FM5) - Fixing Cooling Fan (Rear) (FM6) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - Feed/Drum Driver PCB (UN2) - DC Controller PCB (UN1) [Solutions] - Check COPIER> DISPLAY> ANALOG> FIX-E2. a. In the case of below 295 deg C, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. b. In the case of 295 deg C or higher, check/replace the related harness/cable, connector and parts. [CAUTION] Do not turn ON the power before replacing the Fixing Film Unit. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 001-0003-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Thermistor (Rear) detected a high temperature error.
- Solutions: [Related parts] R1.00 - Harness connecting from the Feed/Drum Driver PCB (UN2/J213) to the Fixing Cooling Fan (Front) and (Rear) (FM5/J6068 and FM6/J6069) - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Fixing Cooling Fan (Front) (FM5) - Fixing Cooling Fan (Rear) (FM6) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - Feed/Drum Driver PCB (UN2) - DC Controller PCB (UN1) [Solutions] - Check COPIER> DISPLAY> ANALOG> FIX-E3. a. In the case of below 295 deg C, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. b. In the case of 295 deg C or higher, check/replace the related harness/cable, connector and parts. [CAUTION] Do not turn ON the power before replacing the Fixing Film Unit. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 001-0004-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Thermistor (Middle) detected a high temperature error.
- Solutions: [Related parts] R1.00 - Harness connecting from the Feed/Drum Driver PCB (UN2/J213) to the Fixing Cooling Fan (Front) and (Rear) (FM5/J6068 and FM6/J6069) - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Fixing Cooling Fan (Front) (FM5) - Fixing Cooling Fan (Rear) (FM6) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - Feed/Drum Driver PCB (UN2) - DC Controller PCB (UN1) [Solutions] - Check COPIER> DISPLAY> ANALOG> FIX-C. a. In the case of below 260 deg C, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. b. In the case of 260 deg C or higher, check/replace the related harness/cable, connector and parts. [CAUTION] Do not turn ON the power before replacing the Fixing Film Unit. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 001-0005-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Thermistor (Front) detected a high temperature error.
- Solutions: [Related parts] R1.00 - Harness connecting from the Feed/Drum Driver PCB (UN2/J213) to the Fixing Cooling Fan (Front) and (Rear) (FM5/J6068 and FM6/J6069) - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Sub Thermistor (TH2/J6491) - Fixing Cooling Fan (Front) (FM5) - Fixing Cooling Fan (Rear) (FM6) - Sub Thermistor (TH2) - Film Assembly - Fan Shutter - Feed/Drum Driver PCB (UN2) - DC Controller PCB (UN1) [Solutions] - Check COPIER> DISPLAY> ANALOG> FIX-F. a. In the case of below 275 deg C, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. b. In the case of 275 deg C or higher, check/replace the related harness/cable, connector and parts. [CAUTION] Do not turn ON the power before replacing the Fixing Film Unit. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 001-0006-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Film Thermistor (Rear) detected a high temperature error.
- Solutions: [Related parts] R1.00 - Harness connecting from the Feed/Drum Driver PCB (UN2/J213) to the Fixing Cooling Fan (Front) and (Rear) (FM5/J6068 and FM6/J6069) - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Sub Thermistor (TH2/J6491) - Fixing Cooling Fan (Front) (FM5) - Fixing Cooling Fan (Rear) (FM6) - Sub Thermistor (TH2) - Film Assembly - Fan Shutter - Feed/Drum Driver PCB (UN2) - DC Controller PCB (UN1) [Solutions] - Check COPIER> DISPLAY> ANALOG> FIX-R. a. In the case of below 275 deg C, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. b. In the case of 275 deg C or higher, check/replace the related harness/cable, connector and parts. [CAUTION] Do not turn ON the power before replacing the Fixing Film Unit. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

- Code: 001-0007-05
- Description: Fixing Thermistor high temperature detection error
- Causes: The Fixing Thermistor detected a high temperature error by hardware detection.
- Solutions: [Related parts] R1.00 - Harness connecting from the Feed/Drum Driver PCB (UN2/J213) to the Fixing Cooling Fan (Front) and (Rear) (FM5/J6068 and FM6/J6069) - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Fixing Thermistors (TH2/J6491 and TH1/J6492) - Fixing Cooling Fan (Front) (FM5) - Fixing Cooling Fan (Rear) (FM6) - Fixing Thermistors (TH1 and TH2) - Film Assembly - Fan Shutter - Feed/Drum Driver PCB (UN2) - DC Controller PCB (UN1) [Solutions] - Check the detected temperatures of all the Fixing Thermistors. a. If it is the upper limit temperature or lower, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. b. If it exceeds the upper limit temperature, check/replace the related harness/cable, connector and parts. [CAUTION] Do not turn ON the power before replacing the Fixing Film Unit. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 002-0001-05
- Description: Fixing Thermistor temperature increase detection error
- Causes: After the Fixing Heater was turned ON, the Fixing Main Thermistor detected no temperature increase.
- Solutions: [Related parts] R1.01 - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Harnesses connecting the AC Driver PCB (UN6/J502),the Drawer Unit (J5012) and the Fixing Heater (J5007) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - DC Controller PCB (UN1) [Solutions] Perform the following in the order while checking whether the error is cleared. 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. 2. Check/replace the related harness/cable, connector and parts. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 002-0002-05
- Description: Fixing Thermistor temperature increase detection error
- Causes: Startup control was not completed although 60 sec had passed.
- Solutions: [Related parts] R1.00 - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - DC Controller PCB (UN1) [Solutions] Perform the following in the order while checking whether the error is cleared. 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. 2. Check/replace the related harness/cable, connector and parts. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 002-0003-05
- Description: Fixing Thermistor temperature increase detection error
- Causes: After the Fixing Heater was turned ON, the Fixing Main Thermistor detected error in temperature increase.
- Solutions: [Related parts] R1.00 - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - DC Controller PCB (UN1) [Solutions] Perform the following in the order while checking whether the error is cleared. 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. 2. Check/replace the related harness/cable, connector and parts. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 002-0004-05
- Description: Fixing Thermistor temperature increase detection error
- Causes: After the Fixing Heater was turned ON, the Fixing Thermistor (Front) detected error in temperature increase.
- Solutions: [Related parts] R1.00 - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - DC Controller PCB (UN1) [Solutions] Perform the following in the order while checking whether the error is cleared. 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. 2. Check/replace the related harness/cable, connector and parts. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES


- Code: 002-0005-05
- Description: Fixing Thermistor temperature increase detection error
- Causes: After the Fixing Heater was turned ON, the Fixing Thermistor (Rear) detected error in temperature increase.
- Solutions: [Related parts] R1.00 - Harnesses connecting the DC Controller PCB (UN1/J122), the Drawer Unit (J5012) and the Main Thermistor (TH1/J6492) - Main Thermistor (TH1) - Film Assembly - Fan Shutter - DC Controller PCB (UN1) [Solutions] Perform the following in the order while checking whether the error is cleared. 1. Go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. Then, turn OFF and then ON the main power. 2. Check/replace the related harness/cable, connector and parts. After performing the Solutions work, go through the following to clear the error: COPIER> FUNCTION> CLEAR> ERR. [Reference] Before replacing the DC Controller PCB, back up the service mode data (approx. 2 min) and restore the backup data after the replacement so the data may be able to be protected. - Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMBUP - Restoration: COPIER (LEVEL2)> FUNCTION> SYSTEM> DSRAMRES

Support fix printer solution and reset Canon i860:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars