Language Selector

Wiki

FrontPage

14342910 Views
Average (28 Votes)

Message Boards

Canon i320 Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon i320 Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon i320 Driver, Firmware and Manuals for Windows and MacOS

No specific Canon i320 printer drivers for your product? No problem. Find the ones that are compatible with your operating system here. You can also find articles on how to do neat things like print wirelessly of control compatibility.
Users enjoy the unique features of i320 printer, which stands out from its counterparts. This multifunctional machine can print and copy documents with exceptional quality as well as scan them for faxing! It is powered by an Automatic Document Feeder (ADF) so you never have to worry about running low on paper again either- just load up your roll once it has been built into your Canon i320 printer model.
In terms of speed, depending what level duplex printing or single sided mode that one chooses when using certain models may alter how quickly they output at many pages per minute

Canon i320 Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon i320 Driver

- Canon i320 printer driver is a software that helps printers and computers communicate with each other through USB connectors, ports or Wi-Fi. It can also be used to monitor warnings about parts needing repair in your office's fleet of printing devices! In addition you will have access to information such as when an 'ink cartridge' needs changing out due for full message on its status bar; if there has been any errors while scanning photos from one side onto paper produced by another (blurred), etc...
- So, what's the point? It <b/>won't let them hack into Computer Utilities & Cracking Tools Resets Chips
- With all these hackers out there who can access any WIC utility tool reset chip or crack adjustment program that you may have. The best way would be via purchasing a license key from https://nguyendangnam.com/ so they only get their hands on those printer drivers which allow us to fix 'paper jam' issues in our printers!

Download Canon i320 Driver for Windows:

- Download Canon i320 Driver for Windows 11: DOWNLOAD LINK

- Download Canon i320 Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon i320 Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon i320 Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon i320 Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon i320 Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon i320 Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon i320 printer Driver for Mac OS:

- Download Canon i320 Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon i320 Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon i320

STEP 1: Go to our website and search for "Canon i320 driver, firmware, manual"

STEP 2: Choose your specific Canon i320 driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon i320 driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon i320 driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon i320 Firmware

- When you use Canon i320 printer to print from a computer or sending jobs to another device, you need the Canon i320 's firmware. But if it gets stuck in an error state and can't be fixed by itself anymore then refilling with original Canon i320 firmware will come handy as this helps fix unstable components of your machine while diagnosing technical errors occurring on both hardware level with software related problems
- The package also includes all necessary tools that are used during these procedures so there isn't anything lost along
- When Canon i320 printer errors, it can be frustrating to know what the cause of your problem may have been. Canon i320 original Firmware, or in layman's terms "Canon i320 printer firmware," is an intermediary software developed by Epson company which helps interact between themselves and their hardware when printing from either computer-based operations or WiFi Direct connections over Ethernet cables direct connection via WiMax networks."The technical error has caused damage"

Download Original Canon i320 Firmware for Windows:

- Original Canon i320 Firmware for Windows: DOWNLOAD LINK

Download Canon i320 Firmware for Mac OS:

- Original Canon i320 Firmware for Mac OS: DOWNLOAD LINK

Canon i320 User Manual

- The Canon i320 Manual for your Canon i320 printer includes instructions to fix common problems and issues. It covers basic disassembly, as well as the steps needed when choosing between different ink types or if there's a clogged printhead that needs clearing out with no clear answer on what will work best in these circumstances?
- Canon i320User Guides provide troubleshooting tips such an easy way of getting around features found within any given model; however some may only include limited information compared those containing more detailed explanations - this could be due partially because they're designed specifically towards beginners who might not yet know everything about using certain items
- Printing is a tedious process, but by using the right equipment like manual Canon i320 printers you can make sure that it goes smoothly. With these machines there's no need for error codes or inconvenience because they will take care of everything!
Just follow along with our step-bystep instructions and fix problems before they happen such as: printer responds slowly when working; poor print quality from your device due to clogged ink pads/nozzle issues etc.; high cost per page (costs more than expected) during printing session

- Canon i320 User Manuals for Windows: DOWNLOAD LINK

- Canon i320 User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon i320 error code list

- Code: E001-0000
- Description: Abnormal high temperature in Main Thermistor 1, 2 => Main Thermistor 1, 2 (TH1) detects 260 deg C or more for 0.2 sec.
- Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-C, or DISPLAY > ANALOG > FIX-E; if it’s less than 260 deg C, go through the following to clear the error: COPIER>FUNCTION>CLEAR>ERR; and then turn OFF/ ON the power. It it’s 260 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E001-0001
- Description: Abnormal high temperature in Sub Thermistor 1, 2 => Sub Thermistor 1, 2 (TH1) detects 275 deg C or more for 0.2 sec.
- Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-E2 or DISPLAY > ANALOG > FIX-E3; if it’s less than 275 deg C, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s 275 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E001-0003
- Description: High temperature error detected by hardware => Hardware detects abnormal high temperature of the Thermistor (Main Thermistor 1: 264 deg C, Main Thermistor 2: 265 deg C, Sub Thermistor 1, 2: 280 deg C) for 400 msec consecutively.
- Solutions: 1. If the detected temperature of the Thermistor is less than the abnormal high temperature specified for Thermistor, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s at abnormally high temperature, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if the not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0000
- Description: Error detected when the Heater is ON => After the Heater was turned ON, Main Thermistor 2, Sub Thermistor 1 or Sub Thermistor 2 detects 21 deg C or more and 50 deg C or less for 3 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0001
- Description: Abnormal detection during paper feeding => During print control, Sub Thermistor detects 70 deg C or less from the target temperature for 5 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check for open circuit inside the Fixing Assembly and any disconnection of the connector. 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0002
- Description: Abnormal low temperature when the Heater is ON (disconnection detected) => After the Heater was turned ON, any of the Thermistors detects 20 deg C or less for 3 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

- Code: E003-0004
- Description: Timeout at start-up => After the start-up control was started, the start-up control is not completed although 60 sec has passed.
- Solutions: 1. Check connection of the Connectors (Thermistor Connector and AC Connector). 2. Replace the Film Unit 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E004-0000
- Description: Thermistor disconnection detection error => Signal name, FUSER_CNCTX, detects disconnection for 500 msec or longer.
- Solutions: 1. Check if the Fixing Assembly is installed. 2. Check connection of the connectors in Fixing Assembly. 3. Check connection of DC Controller PCB (UN1) Connector. 4. Replace the Film Unit. 5. Replace the Shutter Unit. 6. Replace the DC Controller PCB (UN1).


- Code: E004-0001
- Description: Error in detection of welding with fixing relay => Welding of fixing relay on the AC Driver PCB
- Solutions: 1. Replace the AC Driver PCB (replacement is necessary due to welding of the relay). Other fixing-related error occurs (highly possible of E001) 2. Perform the Solutions for the error occurred.


- Code: E009-0000
- Description: Error in engagement => Unable to detect ON with the Fixing Pressure Sensor although 5 seconds have passed.
- Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.


- Code: E009-0001
- Description: Error in disengagement => Unable to detect OFF with the Fixing Pressure Sensor although 5 seconds have passed.
- Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.


- Code: E009-0002
- Description: Pressure error (it is highly possible that grease is scattered on the surface of the cam.) => Unable to detect stopping of the cam at the specified position even if pressure is applied 10 times.
- Solutions: Clean the scattered grease and excess grease on the gear at the rear side of the host machine. Procedure is as follows. 1. Remove the Fixing Assembly. 2. Remove the Gear Cover at the rear side of the host machine, and remove the Pressure Release Stopper and the Pressure Release Support Plate (so that the gear is easily cleaned). 3. Wipe off the scattered grease around the Pressure Release Cam and the Pressure Plate with lint-free paper moistened with alcohol. 4. Wipe off the excess grease on the side of the gear and the shaft.

Support fix printer solution and reset Canon i320:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars