Language Selector

Wiki

FrontPage

13628753 Views
Average (27 Votes)

Message Boards

Canon BJC-8500 Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon BJC-8500 Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon BJC-8500 Driver, Firmware and Manuals for Windows and MacOS

There are many drivers, software and settings to choose from on the https://dnasofts.com/ website for your Canon product that will work with each operating system or without driver software! Click below to learn more about compatibility details of products in detail.
BJC-8500 printer is a multifunction printer that can print, copy and scan documents with exceptional quality. The machine has two operating modes: simplex or duplex styles for faster speeds depending on your needs!

Canon BJC-8500 Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon BJC-8500 Driver

- Canon BJC-8500 Drivers are needed for connecting Canon BJC-8500 to your computer. You can use this software program not only monitor warning parts need repair, but also track where printing progress is at and other important information about how much ink or paper remains in the machine!
- We all have those days where we just can't get our printer working, and it seems like there is an endless list of error code that the darn thing will give us when everything finally does work. This driver helps with these issues of Canon BJC-8500 by fixing 'paper jam' or other problems related to your document feeder being full (which happens more often than you think!). But don't worry; these Canon BJC-8500 drivers won't let hackers into WIC utilities tool reset chip either!

Download Canon BJC-8500 Driver for Windows:

- Download Canon BJC-8500 Driver for Windows 11: DOWNLOAD LINK

- Download Canon BJC-8500 Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon BJC-8500 Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon BJC-8500 Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon BJC-8500 Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon BJC-8500 Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon BJC-8500 Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon BJC-8500 printer Driver for Mac OS:

- Download Canon BJC-8500 Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon BJC-8500 Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon BJC-8500

STEP 1: Go to our website and search for "Canon BJC-8500 driver, firmware, manual"

STEP 2: Choose your specific Canon BJC-8500 driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon BJC-8500 driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon BJC-8500 driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon BJC-8500 Firmware

- The Canon BJC-8500 Firmware is an intermediary software developed by Canon company, which helps to interact between the software and the hardware of the printer with each other. It is used when printing from a computer or sending print jobs from one device to another via WiFi Direct/Ethernet direct connection.
- Canon BJC-8500 needs to be refilled by the the original firmware when the printer components are unstable or the printer went wrong with the teachnical error or firmware errors. By that time, you need a technician or experienced person to fix Canon BJC-8500 and diagnose the problems for your printer.- When Canon BJC-8500 printer goes wrong, there is no need to panic. With the help of its Canon BJC-8500 original firmware (or Canon BJC-8500 Firmware), you can fix your device and get back up on track quickly so that printing jobs aren not missed or delayed due an error with your machine’s components- which is why it needs regular refilling from time-to-time as well!

Download Original Canon BJC-8500 Firmware for Windows:

- Original Canon BJC-8500 Firmware for Windows: DOWNLOAD LINK

Download Canon BJC-8500 Firmware for Mac OS:

- Original Canon BJC-8500 Firmware for Mac OS: DOWNLOAD LINK

Canon BJC-8500 User Manual

- Canon BJC-8500 printer's User Manual is a valuable tool for any individual who purchases or rents one of their products. It contains information about basic assembly, maintenance procedures like changing ink cartridges as well as troubleshooting tips if you're having trouble with your new device and need some assistance from the manufacturer before calling customer service!
- Printing is a tedious process, but by using the right equipment like manual Canon BJC-8500 printers you can make sure that it goes smoothly. With these machines there's no need for error codes or inconvenience because they will take care of everything!
Just follow along with our step-bystep instructions and fix problems before they happen such as: printer responds slowly when working; poor print quality from your device due to clogged ink pads/nozzle issues etc.; high cost per page (costs more than expected) during printing session

- Canon BJC-8500 User Manuals for Windows: DOWNLOAD LINK

- Canon BJC-8500 User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon BJC-8500 error code list

- Code: E001-0000
- Description: Abnormal high temperature in Main Thermistor 1, 2 => Main Thermistor 1, 2 (TH1) detects 260 deg C or more for 0.2 sec.
- Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-C, or DISPLAY > ANALOG > FIX-E; if it’s less than 260 deg C, go through the following to clear the error: COPIER>FUNCTION>CLEAR>ERR; and then turn OFF/ ON the power. It it’s 260 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E001-0001
- Description: Abnormal high temperature in Sub Thermistor 1, 2 => Sub Thermistor 1, 2 (TH1) detects 275 deg C or more for 0.2 sec.
- Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-E2 or DISPLAY > ANALOG > FIX-E3; if it’s less than 275 deg C, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s 275 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E001-0003
- Description: High temperature error detected by hardware => Hardware detects abnormal high temperature of the Thermistor (Main Thermistor 1: 264 deg C, Main Thermistor 2: 265 deg C, Sub Thermistor 1, 2: 280 deg C) for 400 msec consecutively.
- Solutions: 1. If the detected temperature of the Thermistor is less than the abnormal high temperature specified for Thermistor, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s at abnormally high temperature, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if the not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0000
- Description: Error detected when the Heater is ON => After the Heater was turned ON, Main Thermistor 2, Sub Thermistor 1 or Sub Thermistor 2 detects 21 deg C or more and 50 deg C or less for 3 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0001
- Description: Abnormal detection during paper feeding => During print control, Sub Thermistor detects 70 deg C or less from the target temperature for 5 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check for open circuit inside the Fixing Assembly and any disconnection of the connector. 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0002
- Description: Abnormal low temperature when the Heater is ON (disconnection detected) => After the Heater was turned ON, any of the Thermistors detects 20 deg C or less for 3 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

- Code: E003-0004
- Description: Timeout at start-up => After the start-up control was started, the start-up control is not completed although 60 sec has passed.
- Solutions: 1. Check connection of the Connectors (Thermistor Connector and AC Connector). 2. Replace the Film Unit 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E004-0000
- Description: Thermistor disconnection detection error => Signal name, FUSER_CNCTX, detects disconnection for 500 msec or longer.
- Solutions: 1. Check if the Fixing Assembly is installed. 2. Check connection of the connectors in Fixing Assembly. 3. Check connection of DC Controller PCB (UN1) Connector. 4. Replace the Film Unit. 5. Replace the Shutter Unit. 6. Replace the DC Controller PCB (UN1).


- Code: E004-0001
- Description: Error in detection of welding with fixing relay => Welding of fixing relay on the AC Driver PCB
- Solutions: 1. Replace the AC Driver PCB (replacement is necessary due to welding of the relay). Other fixing-related error occurs (highly possible of E001) 2. Perform the Solutions for the error occurred.


- Code: E009-0000
- Description: Error in engagement => Unable to detect ON with the Fixing Pressure Sensor although 5 seconds have passed.
- Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.


- Code: E009-0001
- Description: Error in disengagement => Unable to detect OFF with the Fixing Pressure Sensor although 5 seconds have passed.
- Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.


- Code: E009-0002
- Description: Pressure error (it is highly possible that grease is scattered on the surface of the cam.) => Unable to detect stopping of the cam at the specified position even if pressure is applied 10 times.
- Solutions: Clean the scattered grease and excess grease on the gear at the rear side of the host machine. Procedure is as follows. 1. Remove the Fixing Assembly. 2. Remove the Gear Cover at the rear side of the host machine, and remove the Pressure Release Stopper and the Pressure Release Support Plate (so that the gear is easily cleaned). 3. Wipe off the scattered grease around the Pressure Release Cam and the Pressure Plate with lint-free paper moistened with alcohol. 4. Wipe off the excess grease on the side of the gear and the shaft.

Support fix printer solution and reset Canon BJC-8500:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars