Language Selector

Wiki

FrontPage

14344014 Views
Average (28 Votes)

Message Boards

Canon BJC-8000 Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon BJC-8000 Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon BJC-8000 Driver, Firmware and Manuals for Windows and MacOS

Check our comprehensive list of drivers, software, manuals and wireless settings that are suitable for Canon BJC-8000 printer or other Canon BJC-8000 software. And always stay up to date on the latest site updates by checking out our blog.
Users enjoy the unique features of BJC-8000 printer, which stands out from its counterparts. This multifunctional machine can print and copy documents with exceptional quality as well as scan them for faxing! It is powered by an Automatic Document Feeder (ADF) so you never have to worry about running low on paper again either- just load up your roll once it has been built into your Canon BJC-8000 printer model.
In terms of speed, depending what level duplex printing or single sided mode that one chooses when using certain models may alter how quickly they output at many pages per minute

Canon BJC-8000 Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon BJC-8000 Driver

- Canon BJC-8000 Drivers is an intermediate software that helps the transmission of data between computers and printers through USB connections, ports or Wi-Fi. This can be done in order to make printing easier on both sides; it also supports installation/repairing printer devices like monitoring warning parts are not working properly when they need repair or replacement (just like ink). The progress will show up as well as errors such blurred photo prints due do low resolution setting being enabled while scanning - but there'ss no reason you should have this problem if your settings matched what was suggested earlier!
- So, what's the point? It <b/>won't let them hack into Computer Utilities & Cracking Tools Resets Chips
- With all these hackers out there who can access any WIC utility tool reset chip or crack adjustment program that you may have. The best way would be via purchasing a license key from https://nguyendangnam.com/ so they only get their hands on those printer drivers which allow us to fix 'paper jam' issues in our printers!

Download Canon BJC-8000 Driver for Windows:

- Download Canon BJC-8000 Driver for Windows 11: DOWNLOAD LINK

- Download Canon BJC-8000 Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon BJC-8000 Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon BJC-8000 Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon BJC-8000 Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon BJC-8000 Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon BJC-8000 Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon BJC-8000 printer Driver for Mac OS:

- Download Canon BJC-8000 Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon BJC-8000 Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon BJC-8000

STEP 1: Go to our website and search for "Canon BJC-8000 driver, firmware, manual"

STEP 2: Choose your specific Canon BJC-8000 driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon BJC-8000 driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon BJC-8000 driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon BJC-8000 Firmware

- The Canon BJC-8000 printer Firmware is an intermediary software developed by Canon company, which helps to interact between the hardware and computerized device's firmware with each other. When printing from a computer or sending print jobs over WiFi Direct/Ethernet direct connection it can be used in order for things go smoothly on both ends of case
- Canon BJC-8000 original Firmware, also known simply by laymen’s terms “printer firmware." This intermediary software was developed by Epson company which helps interact between themselves an<br>

Download Original Canon BJC-8000 Firmware for Windows:

- Original Canon BJC-8000 Firmware for Windows: DOWNLOAD LINK

Download Canon BJC-8000 Firmware for Mac OS:

- Original Canon BJC-8000 Firmware for Mac OS: DOWNLOAD LINK

Canon BJC-8000 User Manual

- Canon BJC-8000 User Manual also called BJC-8000 User's Guide, which is provided by Epson company after you had purchasing a product.
The Canon BJC-8000 user manual is a great resource for any person that owns or plans on owning one. The included instructions include basic disassembly of the machine, as well as individual parts like ink tanks and ink pumps-allowing you to change them out yourself if needed! There are also troubleshooting tips with solutions about what might be wrong before reaching out customer service so problems don't get more complicated than they need too!
- The Canon BJC-8000 Manual is a great way to troubleshoot any problem with your printer. You can use the instructions from one of these books, follow them carefully and fix errors code or common issues like: Canon BJC-8000 printer is unresponsive; bad print quality (color mixing/resolution); Canon BJC-8000 won't scan because there are too many paper jams in it - this will cause slow printing times (or even non-existent) plus you might get an error message when trying to start up cleanups mode etc.; if it was Wi-Fi enabled then make sure that both connections work by scanning again until everything shows “Online successfully connected". After making certain all cables inside product connection settings match what they should do.

- Canon BJC-8000 User Manuals for Windows: DOWNLOAD LINK

- Canon BJC-8000 User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon BJC-8000 error code list

- Code: E001-0000
- Description: Abnormal high temperature in Main Thermistor 1, 2 => Main Thermistor 1, 2 (TH1) detects 260 deg C or more for 0.2 sec.
- Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-C, or DISPLAY > ANALOG > FIX-E; if it’s less than 260 deg C, go through the following to clear the error: COPIER>FUNCTION>CLEAR>ERR; and then turn OFF/ ON the power. It it’s 260 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E001-0001
- Description: Abnormal high temperature in Sub Thermistor 1, 2 => Sub Thermistor 1, 2 (TH1) detects 275 deg C or more for 0.2 sec.
- Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-E2 or DISPLAY > ANALOG > FIX-E3; if it’s less than 275 deg C, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s 275 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E001-0003
- Description: High temperature error detected by hardware => Hardware detects abnormal high temperature of the Thermistor (Main Thermistor 1: 264 deg C, Main Thermistor 2: 265 deg C, Sub Thermistor 1, 2: 280 deg C) for 400 msec consecutively.
- Solutions: 1. If the detected temperature of the Thermistor is less than the abnormal high temperature specified for Thermistor, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s at abnormally high temperature, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if the not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0000
- Description: Error detected when the Heater is ON => After the Heater was turned ON, Main Thermistor 2, Sub Thermistor 1 or Sub Thermistor 2 detects 21 deg C or more and 50 deg C or less for 3 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0001
- Description: Abnormal detection during paper feeding => During print control, Sub Thermistor detects 70 deg C or less from the target temperature for 5 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check for open circuit inside the Fixing Assembly and any disconnection of the connector. 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0002
- Description: Abnormal low temperature when the Heater is ON (disconnection detected) => After the Heater was turned ON, any of the Thermistors detects 20 deg C or less for 3 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

- Code: E003-0004
- Description: Timeout at start-up => After the start-up control was started, the start-up control is not completed although 60 sec has passed.
- Solutions: 1. Check connection of the Connectors (Thermistor Connector and AC Connector). 2. Replace the Film Unit 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E004-0000
- Description: Thermistor disconnection detection error => Signal name, FUSER_CNCTX, detects disconnection for 500 msec or longer.
- Solutions: 1. Check if the Fixing Assembly is installed. 2. Check connection of the connectors in Fixing Assembly. 3. Check connection of DC Controller PCB (UN1) Connector. 4. Replace the Film Unit. 5. Replace the Shutter Unit. 6. Replace the DC Controller PCB (UN1).


- Code: E004-0001
- Description: Error in detection of welding with fixing relay => Welding of fixing relay on the AC Driver PCB
- Solutions: 1. Replace the AC Driver PCB (replacement is necessary due to welding of the relay). Other fixing-related error occurs (highly possible of E001) 2. Perform the Solutions for the error occurred.


- Code: E009-0000
- Description: Error in engagement => Unable to detect ON with the Fixing Pressure Sensor although 5 seconds have passed.
- Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.


- Code: E009-0001
- Description: Error in disengagement => Unable to detect OFF with the Fixing Pressure Sensor although 5 seconds have passed.
- Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.


- Code: E009-0002
- Description: Pressure error (it is highly possible that grease is scattered on the surface of the cam.) => Unable to detect stopping of the cam at the specified position even if pressure is applied 10 times.
- Solutions: Clean the scattered grease and excess grease on the gear at the rear side of the host machine. Procedure is as follows. 1. Remove the Fixing Assembly. 2. Remove the Gear Cover at the rear side of the host machine, and remove the Pressure Release Stopper and the Pressure Release Support Plate (so that the gear is easily cleaned). 3. Wipe off the scattered grease around the Pressure Release Cam and the Pressure Plate with lint-free paper moistened with alcohol. 4. Wipe off the excess grease on the side of the gear and the shaft.

Support fix printer solution and reset Canon BJC-8000:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars