Language Selector

Wiki

FrontPage

14345641 Views
Average (28 Votes)

Message Boards

Canon BJC-6000 Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon BJC-6000 Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon BJC-6000 Driver, Firmware and Manuals for Windows and MacOS

https://dnasofts.com/printer drivers and software downloads for the user's convenience! Click on your system to see more about compatibility with your canon product!
BJC-6000 printer is an ideal choice for home users looking to print high quality photos and documents. It features a 4800 x 1200 dpi resolution, 4-ink system with two cartridges that deliver good color or black & white prints at your desired size via its USB connectivity as well as built in card reader so you can easily take all of the memories from life into one place!

Canon BJC-6000 Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon BJC-6000 Driver

- Canon BJC-6000 Drivers is an intermediate software that helps the transmission of data between computers and printers through USB connections, ports or Wi-Fi. This can be done in order to make printing easier on both sides; it also supports installation/repairing printer devices like monitoring warning parts are not working properly when they need repair or replacement (just like ink). The progress will show up as well as errors such blurred photo prints due do low resolution setting being enabled while scanning - but there'ss no reason you should have this problem if your settings matched what was suggested earlier!
- But what type of problem would it solve? It won't let them hack into Computer Utilities & Cracking Tools Resets Chips or cracks adjustment programs. Only way you can buy a license key from the https://nguyendangnam.com/ is using WIC utilities tool reset chip, which means users still need their passwords for accessing these features even though hackers may not have access to those functions themselves!

Download Canon BJC-6000 Driver for Windows:

- Download Canon BJC-6000 Driver for Windows 11: DOWNLOAD LINK

- Download Canon BJC-6000 Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon BJC-6000 Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon BJC-6000 Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon BJC-6000 Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon BJC-6000 Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon BJC-6000 Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon BJC-6000 printer Driver for Mac OS:

- Download Canon BJC-6000 Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon BJC-6000 Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon BJC-6000

STEP 1: Go to our website and search for "Canon BJC-6000 driver, firmware, manual"

STEP 2: Choose your specific Canon BJC-6000 driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon BJC-6000 driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon BJC-6000 driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon BJC-6000 Firmware

- The Canon BJC-6000 Firmware is an intermediary software developed by Canon company, which helps to interact between the software and the hardware of the printer with each other. It is used when printing from a computer or sending print jobs from one device to another via WiFi Direct/Ethernet direct connection.
- Canon BJC-6000 needs to be refilled by the the original firmware when the printer components are unstable or the printer went wrong with the teachnical error or firmware errors. By that time, you need a technician or experienced person to fix Canon BJC-6000 and diagnose the problems for your printer.- When Canon BJC-6000 printer errors, it can be frustrating to know what the cause of your problem may have been. Canon BJC-6000 original Firmware, or in layman's terms "Canon BJC-6000 printer firmware," is an intermediary software developed by Epson company which helps interact between themselves and their hardware when printing from either computer-based operations or WiFi Direct connections over Ethernet cables direct connection via WiMax networks."The technical error has caused damage"

Download Original Canon BJC-6000 Firmware for Windows:

- Original Canon BJC-6000 Firmware for Windows: DOWNLOAD LINK

Download Canon BJC-6000 Firmware for Mac OS:

- Original Canon BJC-6000 Firmware for Mac OS: DOWNLOAD LINK

Canon BJC-6000 User Manual

- Canon BJC-6000 printer's User Manual is a valuable tool for any individual who purchases or rents one of their products. It contains information about basic assembly, maintenance procedures like changing ink cartridges as well as troubleshooting tips if you're having trouble with your new device and need some assistance from the manufacturer before calling customer service!
- By using Canon BJC-6000 Manual, you can follow the instructions of the ebook and then you are able to fix errors code or common error like printer is unresponsive, bad print quality, printer won't scan, too many paper jams, prints too slowly, printing is too expensive, can't print from mobile device, Wi-Fi printing takes too long, disassembly or assembly of printer, Canon BJC-6000 maintenance, sensor errors, Canon BJC-6000 software problem, printer went problem, Canon BJC-6000 troubleshooting, printer cable connections inside the product, ...
You can use our guide in order to understand all aspects of using this device including installation process and proper usage guidelines so that you never run into any issues while printing or configuring your machine!

- Canon BJC-6000 User Manuals for Windows: DOWNLOAD LINK

- Canon BJC-6000 User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon BJC-6000 error code list

- Code: E001-0000
- Description: Abnormal high temperature in Main Thermistor 1, 2 => Main Thermistor 1, 2 (TH1) detects 260 deg C or more for 0.2 sec.
- Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-C, or DISPLAY > ANALOG > FIX-E; if it’s less than 260 deg C, go through the following to clear the error: COPIER>FUNCTION>CLEAR>ERR; and then turn OFF/ ON the power. It it’s 260 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E001-0001
- Description: Abnormal high temperature in Sub Thermistor 1, 2 => Sub Thermistor 1, 2 (TH1) detects 275 deg C or more for 0.2 sec.
- Solutions: 1. Go through the following: DISPLAY > ANALOG > FIX-E2 or DISPLAY > ANALOG > FIX-E3; if it’s less than 275 deg C, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s 275 deg C or more, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E001-0003
- Description: High temperature error detected by hardware => Hardware detects abnormal high temperature of the Thermistor (Main Thermistor 1: 264 deg C, Main Thermistor 2: 265 deg C, Sub Thermistor 1, 2: 280 deg C) for 400 msec consecutively.
- Solutions: 1. If the detected temperature of the Thermistor is less than the abnormal high temperature specified for Thermistor, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. If it’s at abnormally high temperature, do not turn on the power before replacing the Film Unit. 2. Replace the Film Unit. 3. Replace the Shutter Unit. 4. Go through the following to check drive of FM5 and FM6: COPIER > FUNCTION > PART-CHK > FAN; if the not working properly, replace the fan. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0000
- Description: Error detected when the Heater is ON => After the Heater was turned ON, Main Thermistor 2, Sub Thermistor 1 or Sub Thermistor 2 detects 21 deg C or more and 50 deg C or less for 3 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0001
- Description: Abnormal detection during paper feeding => During print control, Sub Thermistor detects 70 deg C or less from the target temperature for 5 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check for open circuit inside the Fixing Assembly and any disconnection of the connector. 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E003-0002
- Description: Abnormal low temperature when the Heater is ON (disconnection detected) => After the Heater was turned ON, any of the Thermistors detects 20 deg C or less for 3 sec.
- Solutions: 1. Go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR; and then turn OFF and then ON the power. 2. Check connection of the Connectors (Thermistor Connector and AC Connector). 3. Replace the Film Unit. 4. Replace the Shutter Unit. 5. Replace the DC Controller PCB (UN1). NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.

- Code: E003-0004
- Description: Timeout at start-up => After the start-up control was started, the start-up control is not completed although 60 sec has passed.
- Solutions: 1. Check connection of the Connectors (Thermistor Connector and AC Connector). 2. Replace the Film Unit 3. Replace the Shutter Unit. 4. Replace the DC Controller PCB (UN1) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR.


- Code: E004-0000
- Description: Thermistor disconnection detection error => Signal name, FUSER_CNCTX, detects disconnection for 500 msec or longer.
- Solutions: 1. Check if the Fixing Assembly is installed. 2. Check connection of the connectors in Fixing Assembly. 3. Check connection of DC Controller PCB (UN1) Connector. 4. Replace the Film Unit. 5. Replace the Shutter Unit. 6. Replace the DC Controller PCB (UN1).


- Code: E004-0001
- Description: Error in detection of welding with fixing relay => Welding of fixing relay on the AC Driver PCB
- Solutions: 1. Replace the AC Driver PCB (replacement is necessary due to welding of the relay). Other fixing-related error occurs (highly possible of E001) 2. Perform the Solutions for the error occurred.


- Code: E009-0000
- Description: Error in engagement => Unable to detect ON with the Fixing Pressure Sensor although 5 seconds have passed.
- Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.


- Code: E009-0001
- Description: Error in disengagement => Unable to detect OFF with the Fixing Pressure Sensor although 5 seconds have passed.
- Solutions: 1. Turn OFF and then ON the power. 2. Remove and then reinstall the Fixing Assembly. 3. Go through the following to move M21: COPIER > FUNCTION > PART-CHK > MTR. If the motor rotates properly: 4-1. Replace the Fixing Drive Assembly. 5-1. Replace the DC Controller PCB (UN1). If the motor does not work properly: 4-2. Identify and replace the faulty gear. 5-2. Replace the Motor.


- Code: E009-0002
- Description: Pressure error (it is highly possible that grease is scattered on the surface of the cam.) => Unable to detect stopping of the cam at the specified position even if pressure is applied 10 times.
- Solutions: Clean the scattered grease and excess grease on the gear at the rear side of the host machine. Procedure is as follows. 1. Remove the Fixing Assembly. 2. Remove the Gear Cover at the rear side of the host machine, and remove the Pressure Release Stopper and the Pressure Release Support Plate (so that the gear is easily cleaned). 3. Wipe off the scattered grease around the Pressure Release Cam and the Pressure Plate with lint-free paper moistened with alcohol. 4. Wipe off the excess grease on the side of the gear and the shaft.

Support fix printer solution and reset Canon BJC-6000:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars