Language Selector

Wiki

FrontPage

13632606 Views
Average (27 Votes)

Message Boards

Canon CX-G2400-2" Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon CX-G2400-2" Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon CX-G2400-2" Driver, Firmware and Manuals for Windows and MacOS

No specific Canon CX-G2400-2" printer drivers for your product? No problem. Find the ones that are compatible with your operating system here. You can also find articles on how to do neat things like print wirelessly of control compatibility.
Users enjoy the unique features of Canon CX-G2400 2" Inkjet Card Printer printer, which stands out from its counterparts. This multifunctional machine can print and copy documents with exceptional quality as well as scan them for faxing! It is powered by an Automatic Document Feeder (ADF) so you never have to worry about running low on paper again either- just load up your roll once it has been built into your Canon CX-G2400-2" printer model.
In terms of speed, depending what level duplex printing or single sided mode that one chooses when using certain models may alter how quickly they output at many pages per minute

Canon CX-G2400-2

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon CX-G2400-2" Driver

- Canon CX-G2400-2" printer driver is a software that helps printers and computers communicate with each other through USB connectors, ports or Wi-Fi. It can also be used to monitor warnings about parts needing repair in your office's fleet of printing devices! In addition you will have access to information such as when an 'ink cartridge' needs changing out due for full message on its status bar; if there has been any errors while scanning photos from one side onto paper produced by another (blurred), etc...
- So, what's the point? It <b/>won't let them hack into Computer Utilities & Cracking Tools Resets Chips
- With all these hackers out there who can access any WIC utility tool reset chip or crack adjustment program that you may have. The best way would be via purchasing a license key from https://nguyendangnam.com/ so they only get their hands on those printer drivers which allow us to fix 'paper jam' issues in our printers!

Download Canon CX-G2400-2" Driver for Windows:

- Download Canon CX-G2400-2" Driver for Windows 11: DOWNLOAD LINK

- Download Canon CX-G2400-2" Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon CX-G2400-2" Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon CX-G2400-2" Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon CX-G2400-2" Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon CX-G2400-2" Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon CX-G2400-2" Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon CX-G2400-2" printer Driver for Mac OS:

- Download Canon CX-G2400-2" Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon CX-G2400-2" Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon CX-G2400-2"

STEP 1: Go to our website and search for "Canon CX-G2400-2" driver, firmware, manual"

STEP 2: Choose your specific Canon CX-G2400-2" driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon CX-G2400-2

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon CX-G2400-2

STEP 5: Read the instructions to install and start using the softwares.

Canon CX-G2400-2" Firmware

- The Canon CX-G2400-2" printer Firmware is an intermediary software developed by Canon company, which helps to interact between the computer and hardware with each other. It's used when printing from a computer or sending jobs over WiFi Direct/Ethernet direct connection.
- For this reason the Canon CX-G2400-2" printer need be refilled using original firmware in case components become unstable due technical error messages on screen about how to fix them; as well if you receive errors pertaining specifically within third party programs like Adobe Photoshop CS6 update manager crashing while trying install recent updates available online
- Canon CX-G2400-2" original Firmware, also known simply by laymen’s terms “printer firmware." This intermediary software was developed by Epson company which helps interact between themselves an<br>

Download Original Canon CX-G2400-2" Firmware for Windows:

- Original Canon CX-G2400-2" Firmware for Windows: DOWNLOAD LINK

Download Canon CX-G2400-2" Firmware for Mac OS:

- Original Canon CX-G2400-2" Firmware for Mac OS: DOWNLOAD LINK

Canon CX-G2400-2" User Manual

- Canon CX-G2400-2" printer's User Manual is a valuable tool for any individual who purchases or rents one of their products. It contains information about basic assembly, maintenance procedures like changing ink cartridges as well as troubleshooting tips if you're having trouble with your new device and need some assistance from the manufacturer before calling customer service!
- Printing is a tedious process, but by using the right equipment like manual Canon CX-G2400-2" printers you can make sure that it goes smoothly. With these machines there's no need for error codes or inconvenience because they will take care of everything!
Just follow along with our step-bystep instructions and fix problems before they happen such as: printer responds slowly when working; poor print quality from your device due to clogged ink pads/nozzle issues etc.; high cost per page (costs more than expected) during printing session

- Canon CX-G2400-2" User Manuals for Windows: DOWNLOAD LINK

- Canon CX-G2400-2" User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon CX-G2400-2" error code list

- Code: E001-0001
- Description: Main Thermistor high temperature detection => Main Thermistor 2 detected a temperature of 230 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/J12) and the Fixing Assembly (UN37/J123,UN13/J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-C => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0002
- Description: Center Thermistor high temperature detection => Main Thermistor 1 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0003
- Description: Edge Thermistor high temperature detection => Sub Thermistor 1 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0004
- Description: Edge Thermistor high temperature detection => Sub Thermistor 2 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E3 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0005
- Description: Center Thermistor high temperature detection => Main Thermistor 1 hardware signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0006
- Description: Edge Thermistor high temperature detection => Sub Thermistor 1 hardware error detection signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR

- Code: E001-0007
- Description: Edge Thermistor high temperature detection => Sub Thermistor 2 hardware error detection signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-C Check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E3 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0008
- Description: Displacement detection => The temperature difference between the Sub Thermistor 1 (TH3) and the Sub Thermistor 2 (TH4) remained 45 deg C or more for 1 second or more.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2,FIX-E3 => When the value of either one is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the both values are lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E002-0006
- Description: Detection of abnormal temperature increase => Fixing Assembly error, Fixing temperature detection error
- Solutions: 1. Check the location for voltage of the Fixing Assembly -> Replace with a correct Fixing Assembly for the location in the case of mismatching. 2. Check the location for voltage of the AC Driver PCB (UN14) -> Replace with a correct AC Driver PCB (UN14) for the location in the case of mismatching. 3. Check failure between the AC Driver PCB (UN14/J103) and the Fixing Assembly (UN37/J123, UN13/J13). (trapped cable, open circuit, connector disconnection) -> Replace the part in the case of trapped cable/open circuit 4. Replace the AC Driver PCB (UN14) 5. Replace the Fixing Assembly 6. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0001
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Main Thermistor 1 detected a temperature of 22 deg C or lower for more than 5 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0002
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Main Thermistor 2 detected a temperature of 40 deg C or lower for more than 3 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0003
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Sub Thermistor 1 detected a temperature of 40 deg C or lower for more than 3 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR

Support fix printer solution and reset Canon CX-G2400-2":
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars