Language Selector

Wiki

FrontPage

13631049 Views
Average (27 Votes)

Message Boards

Canon Lite-C170 Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon Lite-C170 Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon Lite-C170 Driver, Firmware and Manuals for Windows and MacOS

https://dnasofts.com/ is your one-stop shop to find drivers for Canon Lite-C170 printer softwares and utilities, or if you need information on the compatibility of Canon products with OS like Windows 7, Windows 8, Windows 10, Windows 11 or Linux, MacOS, ... We have found that our site has everything in this area that you might be looking for!
imagePRESS Lite C170 Series printer is best suited for office use and its bundled with many features which makes it a productive and efficient machine. This product supports duplex printing and many other advanced features.

Canon Lite-C170 Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon Lite-C170 Driver

- Canon Lite-C170 printer driver is a great way to stay up-to date with your office's printing devices! You can monitor the warning signs that an ink cartridge needs changing, check out any errors during scanning photos from one side onto paper produced by another (blurred), and more.
- So, what's the point? It <b/>won't let them hack into Computer Utilities & Cracking Tools Resets Chips
- With all these hackers out there who can access any WIC utility tool reset chip or crack adjustment program that you may have. The best way would be via purchasing a license key from https://nguyendangnam.com/ so they only get their hands on those printer drivers which allow us to fix 'paper jam' issues in our printers!

Download Canon Lite-C170 Driver for Windows:

- Download Canon Lite-C170 Driver for Windows 11: DOWNLOAD LINK

- Download Canon Lite-C170 Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon Lite-C170 Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon Lite-C170 Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon Lite-C170 Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon Lite-C170 Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon Lite-C170 Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon Lite-C170 printer Driver for Mac OS:

- Download Canon Lite-C170 Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon Lite-C170 Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon Lite-C170

STEP 1: Go to our website and search for "Canon Lite-C170 driver, firmware, manual"

STEP 2: Choose your specific Canon Lite-C170 driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon Lite-C170 driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon Lite-C170 driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon Lite-C170 Firmware

- The Canon Lite-C170 printer Firmware is an intermediary software developed by Canon company, which helps to interact between the hardware of a printer with each other. It can be used when printing from your computer or sending jobs over Wi-Fi Direct/Ethernet direct connection and it will ensure that everything goes smoothly without any errors occurring during transfer because this process relies on compatibility built into its own code rather than using external programs such as those found bundled onto Microsoft Office suites like Word & Excel etc..
- In order for refilling ink levels in these situations where there may have been some error caused either internally (due typically at least partially) due problems related incorrectly installed components), they're usually best left handled by technicians who know what they are doing.
- Canon Lite-C170 original Firmware, also known simply by laymen’s terms “printer firmware." This intermediary software was developed by Epson company which helps interact between themselves an<br>

Download Original Canon Lite-C170 Firmware for Windows:

- Original Canon Lite-C170 Firmware for Windows: DOWNLOAD LINK

Download Canon Lite-C170 Firmware for Mac OS:

- Original Canon Lite-C170 Firmware for Mac OS: DOWNLOAD LINK

Canon Lite-C170 User Manual

- A Canon Lite-C170 printer's User Manual is a guide that comes with the purchase of your device. It provides instructions on how to correctly configure, assemble and use it as well as information about troubleshooting problems should they occur - this makes sure you don't have call customer service!
- It's a great way to get your printer working again! This Canon Lite-C170 Manual will help you fix common errors and code when troubleshooting any problems with the machine, like it being unresponsive or producing bad quality prints.
I recommend printing this Canon Lite-C170 's document in case anything goes wrong while using one of our products at home so that there are no more headaches on top of everything else we've dealt with today -- just make sure all tabs are turned up tight against each page before unfolding them (you don't want staples!).

- Canon Lite-C170 User Manuals for Windows: DOWNLOAD LINK

- Canon Lite-C170 User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon Lite-C170 error code list

- Code: E001-0001
- Description: Main Thermistor high temperature detection => Main Thermistor 2 detected a temperature of 230 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/J12) and the Fixing Assembly (UN37/J123,UN13/J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-C => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0002
- Description: Center Thermistor high temperature detection => Main Thermistor 1 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0003
- Description: Edge Thermistor high temperature detection => Sub Thermistor 1 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0004
- Description: Edge Thermistor high temperature detection => Sub Thermistor 2 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E3 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0005
- Description: Center Thermistor high temperature detection => Main Thermistor 1 hardware signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0006
- Description: Edge Thermistor high temperature detection => Sub Thermistor 1 hardware error detection signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR

- Code: E001-0007
- Description: Edge Thermistor high temperature detection => Sub Thermistor 2 hardware error detection signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-C Check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E3 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0008
- Description: Displacement detection => The temperature difference between the Sub Thermistor 1 (TH3) and the Sub Thermistor 2 (TH4) remained 45 deg C or more for 1 second or more.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2,FIX-E3 => When the value of either one is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the both values are lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E002-0006
- Description: Detection of abnormal temperature increase => Fixing Assembly error, Fixing temperature detection error
- Solutions: 1. Check the location for voltage of the Fixing Assembly -> Replace with a correct Fixing Assembly for the location in the case of mismatching. 2. Check the location for voltage of the AC Driver PCB (UN14) -> Replace with a correct AC Driver PCB (UN14) for the location in the case of mismatching. 3. Check failure between the AC Driver PCB (UN14/J103) and the Fixing Assembly (UN37/J123, UN13/J13). (trapped cable, open circuit, connector disconnection) -> Replace the part in the case of trapped cable/open circuit 4. Replace the AC Driver PCB (UN14) 5. Replace the Fixing Assembly 6. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0001
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Main Thermistor 1 detected a temperature of 22 deg C or lower for more than 5 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0002
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Main Thermistor 2 detected a temperature of 40 deg C or lower for more than 3 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0003
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Sub Thermistor 1 detected a temperature of 40 deg C or lower for more than 3 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR

Support fix printer solution and reset Canon Lite-C170:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars