Language Selector

Wiki

FrontPage

13685513 Views
Average (27 Votes)

Message Boards

Canon C6000 Driver, Firmware and Manuals for Windows and MacOS

DN
Dang Nam, modified 1 Month ago.

Canon C6000 Driver, Firmware and Manuals for Windows and MacOS

Yoda Posts: 1354 Join Date: 4/26/21 Recent Posts
Canon C6000 Driver, Firmware and Manuals for Windows and MacOS

As a Canon customer, you know that your device is difficult to use without official software. Luckily, we have got everything covered on the https://dnasofts.com/ website. Here you can find drivers for all of your Canon C6000 printer products along with manual and wireless settings. Plus, our team provides information on compatibility with different operating systems so there's never another question about what will work best for you!
Users enjoy the unique features of imagePRESS C6000 printer, which stands out from its counterparts. This multifunctional machine can print and copy documents with exceptional quality as well as scan them for faxing! It is powered by an Automatic Document Feeder (ADF) so you never have to worry about running low on paper again either- just load up your roll once it has been built into your Canon C6000 printer model.
In terms of speed, depending what level duplex printing or single sided mode that one chooses when using certain models may alter how quickly they output at many pages per minute

Canon C6000 Driver, Firmware and Manuals for Windows and MacOS

Get Epson printer driver, firmware and manual more over here: https://dnasofts.com/

Canon C6000 Driver

- Canon C6000 printer driver is a great way to stay up-to date with your office's printing devices! You can monitor the warning signs that an ink cartridge needs changing, check out any errors during scanning photos from one side onto paper produced by another (blurred), and more.
- At first glance, it is difficult to understand why anyone would need a driver that fixes Canon C6000 printer errors and issues. However there are many reasons someone might have this installed on their computer--maybe they got one piece of paper stuck in the machine causing an 'Paper Jam' error code while trying other things with Photoshop or Microsoft Office? Or maybe you were running low on ink so wanted try cleaning out some dirt inside before calling for help; either way if any type of problem arises users should know exactly where too find WIC utility reset chip (or hack adjustment programs) because finding them elsewhere will only lead more trouble later down road

Download Canon C6000 Driver for Windows:

- Download Canon C6000 Driver for Windows 11: DOWNLOAD LINK

- Download Canon C6000 Driver for Windows 10 64bit: DOWNLOAD LINK

- Download Canon C6000 Driver for Windows 10 32bit: DOWNLOAD LINK

- Download Canon C6000 Driver for Windows 8 64bit: DOWNLOAD LINK

- Download Canon C6000 Driver for Windows 8 32bit: DOWNLOAD LINK

- Download Canon C6000 Driver for Windows 7 64bit: DOWNLOAD LINK

- Download Canon C6000 Driver for Windows 7 32bit: DOWNLOAD LINK

Download Canon C6000 printer Driver for Mac OS:

- Download Canon C6000 Driver for Mac OS 11.xx: DOWNLOAD LINK

- Download Canon C6000 Driver for Mac OS 10.xx: DOWNLOAD LINK

How to download softwares or documents of Canon C6000

STEP 1: Go to our website and search for "Canon C6000 driver, firmware, manual"

STEP 2: Choose your specific Canon C6000 driver, firmware and manual and click to Download button image

STEP 3: Wait for the downloading webpage and download the software

Canon C6000 driver, firmware, manual downloading webpage

STEP 4: Your downloaded file has been located in Browser Downloaded Page

Canon C6000 driver, firmware, manual downloaded file

STEP 5: Read the instructions to install and start using the softwares.

Canon C6000 Firmware

- The Canon C6000 Firmware is an intermediary software developed by Canon company, which helps to interact between the software and the hardware of the printer with each other. It is used when printing from a computer or sending print jobs from one device to another via WiFi Direct/Ethernet direct connection.
- Canon C6000 needs to be refilled by the the original firmware when the printer components are unstable or the printer went wrong with the teachnical error or firmware errors. By that time, you need a technician or experienced person to fix Canon C6000 and diagnose the problems for your printer.- The printer errors can make you feel frustrated when you don't know what caused your problem. Original Firmware, or in layman's terms "printer firmware" is developed by Epson company which helps interact between themselves and their hardware during printing either from computer-based operations or Wi-Fi Direct connections over Ethernet cables direct connection via WIMAX networks

Download Original Canon C6000 Firmware for Windows:

- Original Canon C6000 Firmware for Windows: DOWNLOAD LINK

Download Canon C6000 Firmware for Mac OS:

- Original Canon C6000 Firmware for Mac OS: DOWNLOAD LINK

Canon C6000 User Manual

- Canon C6000 User Manual also called imagePRESS C6000 User's Guide, which is provided by Epson company after you had purchasing a product.
The Canon C6000 user manual is a great resource for any person that owns or plans on owning one. The included instructions include basic disassembly of the machine, as well as individual parts like ink tanks and ink pumps-allowing you to change them out yourself if needed! There are also troubleshooting tips with solutions about what might be wrong before reaching out customer service so problems don't get more complicated than they need too!
- The Canon C6000 Manual is a great way to troubleshoot any problem with your printer. You can use the instructions from one of these books, follow them carefully and fix errors code or common issues like: Canon C6000 printer is unresponsive; bad print quality (color mixing/resolution); Canon C6000 won't scan because there are too many paper jams in it - this will cause slow printing times (or even non-existent) plus you might get an error message when trying to start up cleanups mode etc.; if it was Wi-Fi enabled then make sure that both connections work by scanning again until everything shows “Online successfully connected". After making certain all cables inside product connection settings match what they should do.

- Canon C6000 User Manuals for Windows: DOWNLOAD LINK

- Canon C6000 User Manuals for MacOS: DOWNLOAD LINK

[Quick guide] Fix Canon C6000 error code list

- Code: E001-0001
- Description: Main Thermistor high temperature detection => Main Thermistor 2 detected a temperature of 230 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/J12) and the Fixing Assembly (UN37/J123,UN13/J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-C => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0002
- Description: Center Thermistor high temperature detection => Main Thermistor 1 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0003
- Description: Edge Thermistor high temperature detection => Sub Thermistor 1 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0004
- Description: Edge Thermistor high temperature detection => Sub Thermistor 2 detected a temperature of 283 deg C or higher for 0.1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E3 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0005
- Description: Center Thermistor high temperature detection => Main Thermistor 1 hardware signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0006
- Description: Edge Thermistor high temperature detection => Sub Thermistor 1 hardware error detection signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR

- Code: E001-0007
- Description: Edge Thermistor high temperature detection => Sub Thermistor 2 hardware error detection signal is continued for 1 sec or longer.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-C Check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E3 => When the value is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the value is lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E001-0008
- Description: Displacement detection => The temperature difference between the Sub Thermistor 1 (TH3) and the Sub Thermistor 2 (TH4) remained 45 deg C or more for 1 second or more.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Disconnect the connector of DC Controller PCB (UN09/ J12) and start the host machine to check the reading value of the following: service mode > COPIER > DISPLAY > ANALOG > FIX-E2,FIX-E3 => When the value of either one is 40 deg C or higher 3-1. Replace the DC Controller PCB (UN09) => When the both values are lower than 40 deg C 3-2. Replace the Fixing Assembly NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E002-0006
- Description: Detection of abnormal temperature increase => Fixing Assembly error, Fixing temperature detection error
- Solutions: 1. Check the location for voltage of the Fixing Assembly -> Replace with a correct Fixing Assembly for the location in the case of mismatching. 2. Check the location for voltage of the AC Driver PCB (UN14) -> Replace with a correct AC Driver PCB (UN14) for the location in the case of mismatching. 3. Check failure between the AC Driver PCB (UN14/J103) and the Fixing Assembly (UN37/J123, UN13/J13). (trapped cable, open circuit, connector disconnection) -> Replace the part in the case of trapped cable/open circuit 4. Replace the AC Driver PCB (UN14) 5. Replace the Fixing Assembly 6. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0001
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Main Thermistor 1 detected a temperature of 22 deg C or lower for more than 5 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0002
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Main Thermistor 2 detected a temperature of 40 deg C or lower for more than 3 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR


- Code: E003-0003
- Description: Thermistor open circuit detection => In the period from initial rotation to printing, Sub Thermistor 1 detected a temperature of 40 deg C or lower for more than 3 seconds.
- Solutions: Fixing Assembly error, Fixing temperature detection error 1. Check failure between the DC Controller PCB (UN09/ J12) and the Fixing Assembly (UN37/ J123, UN13/ J13) (trapped cable, open circuit, connector disconnection). -> Replace the part in the case of trapped cable/open circuit 2. Replace the Fixing Assembly 3. Replace the DC Controller PCB (UN09) NOTE: After performing the above Solutions work, go through the following to clear the error: COPIER > FUNCTION > CLEAR > ERR

Support fix printer solution and reset Canon C6000:
– Telegramhttps://t.me/hyperaktiv
– Facebookhttps://www.facebook.com/dngnm/

Related sources:
https://nguyendangnam.com/
https://shop.nguyendangnam.com
https://nguyendangnam.com/download-epson-artisan-710-driver-firmware-users-manual-and-wic-key.html
Fix other error code list about printer, https://nguyendangnam.com/epson-driver
Fix other error code list about printer, https://nguyendangnam.com/error-code
https://shop.nguyendangnam.com/product-category/adjustment-program/

Calendar

VIET NAM's Calendars