Common mistakes beginners must avoid while changing a flat tyre 21 st February 2023
If you don't drive often, you could believe you don't need the competence to change a tyre and may leave it to the mechanic. However, the "flat tyre" problem can happen to anyone at any moment, whether you're driving your car around the block or through highways. The process of changing a tyre is more straightforward than you may imagine. It is better to fix the flat tyre issue immediately before it results in an accident.
Also, remember another best practice to follow is to buy new car insurance. This will provide a considerable financial benefit if your vehicle meets with an accident and causes loss or damage to any third party's property.
Here are some of the most frequent problems encountered while changing a tyre are listed below.
1. Shifting while on an incline:
Get to level ground before pulling the jack out of the car and changing the tyre. If you try to replace the tyre while on a slope, the car can slide off the jack. Before you jack up the car and steady it, set the emergency brake. To prevent rolling, put wheel wedges in front or behind the tyres.
2. Lacking the required tools:
Most individuals don't examine the vehicle jack kit when they acquire a car and undermine the importance of a complete kit. Ensure you check the jack kit thoroughly before driving.
3. Having passengers in the car:
Consider the situation when you have to repair a flat tyre quickly, and you have located a suitable location to do it. Before the tyre-changing procedure begins, ensure all passengers, including pets, exit the car. This can help change the tyres easily as you remove obstructive weight from the vehicle.
4. Stuck alloy wheel rims:
Even seasoned drivers can get caught off guard by this one. Due to rust, alloy wheel rims that haven't been removed for a while may end up attached to the hub immediately behind where the tyre is located. You might need a hammer in the car, which you can use to hit the centre of the wheel covering the tyre. However, it is recommended to take the help of a professional mechanic.
5. Incorrect use of jacking points:
Every car has a few places on the underside that are intended to be used with a jack. Neglecting this part of a flat tyre replacement could cause damage to the automobile or cause it to fall off the jack. The owner's manual for your particular car model will include the proper jacking points. Always use those points to secure the jack.
6. Forgetting about your spare tyre:
Some vehicle owners heed it. An easy maintenance task is to check the spare tyre's condition every few months. If you need to put the spare tyre, do ensure that it is adequately filled and in good condition. If it's flat, weak, rotten, or fractured, it is of no help.
7. Impossible to unscrew wheel nuts or studs:
Even people with well-developed biceps may struggle with this. It might be relatively easy to manually free wheel nuts if they were excessively tight the last time you visited the workshop. Additionally, overtightening has the potential to harm threads permanently.
A flat tyre is a common occurrence that causes stress levels to soar. Take a deep breath and ensure you exit the road safely to prevent the risk of accidents. While there is no way to avoid a flat tyre, you can prepare for such situations by knowing basic car know-how. We also urge you to buy new car insurance since it covers the costs of an accident and financially protects your vehicle against the damages.
Click HERE to buy new car insurance policy.
Disclaimer: The information provided above is for illustrative purposes only. To get more details, please refer to policy wordings and prospectus before purchasing a policy.